30J能量驱动类镍银X光激光的理论研究

 在1.2×10¹³W·cm^－2低功率密度下，对基频激光预主短脉冲驱动类镍银X光激光机理进行了数值模拟和理论分析。证实了在靶长23 mm范围内X光激光都能获得有效放大，取得了和实验相符合的结果。考虑了单柱面镜线聚焦沿靶长度方向功率密度的非均匀性对X光激光放大的影响，采用弯曲靶能有效克服折射以及单柱面镜线聚焦功率密度非均匀带来的不利影响。理论模拟给出的类镍银X光激光的出光下限泵浦功率密度也与实验符合得很好。理论模拟还表明，采用1%左右的预脉冲强度并对预主脉冲时间间隔进行优化，X光激光的输出能量和能量转换效率将获得大幅度提高。     

因子分析—伏安法同时测定波峰重叠的混合物组份

本文将目标因子分析用于伏安分析法同时测定波峰重叠的混合物组份。用此法对Ｐｂ（Ⅱ）、Ｔｌ（Ｉ）混合体系的导数脉冲伏安重叠峰数据进行解析，获得了较理想的结果。     

目标因子分光光度法同时测定中成药复方五味子中三项活性成分

将目标因子分光光度法应用于五味子提取液中五味子甲素、五味子乙素、五味子醇甲等三项活性成分的同时测定,介绍了基本原理和具体的分析步骤,运用计算机VC 语言对试验数据进行回归分析。试验结果表明,目标因子分光光度法对样品各组分的平均回收率在98.9%-106.7%之间,样品不经分离即可同时测定。     

近红外漫反射光谱法对固态样品的无损分析

本文应用目标因子分析研究了固态样品的近红外漫反射光谱，用目标因子分析成功地确定了固态样品的物种数、物种种类和各物种的含量。     

完全未知混合体系中纯组份的红外光谱解析

提出一种新的目标转化因子分析，其初始向量的构造基于实际最大差异光谱，无需分离即可从红外混合体系中解析出纯组份光谱。该算法简单易懂，不必迭代，运算量小，应用于模拟及实际体系，结果令人满意。     

Clinical quality vs analytical performance: what are the right targets and target values?

For optimal performance of laboratory tests, testing processes should be designed to provide clinically useful quality and QC procedures should be selected to assure that the necessary clinical quality is achieved in routine production. One important issue is how to define clinical quality. Today’s practice guidelines, quality regulations, and quality standards provide some targets for analytical quality, but they fail to adequately address clinical quality. Target values for precision and accuracy are not the same as clinical quality, though analytical performance certainly contributes to the clinical quality of test results. How can we proceed in our quest to improve quality when there are inconsistencies and inadequacies in the specifications found in practice guidelines, regulations, and standards? Today target values are often being set for the wrong targets. A better approach is possible if we focus on test interpretation guidelines to define clinical quality, then derive specifications for the accuracy and precision that are appropriate for the method, as well the QC rules and numbers of control measurements that are necessary to guarantee the desired quality will be achieved in routine operation of the testing process.     

聚乳酸及其共聚物载药微球的研究进展

聚乳酸及其共聚物由于其无毒、生物相容性好和可降解性而在医药领域有广泛的应用.本文对聚乳酸及其共聚物在药物控释及靶向方面的研究进行综述和展望.     

The role of proficiency testing in the detection and resolution of calibration bias in the LeadCare® blood lead analyzer; limitations of peer-group assessment

Following implementation of the CLIA ‘88 laboratory regulations, the primary role of proficiency testing (external quality assessment, PT) in the U.S. has been widely viewed as one of assuring regulatory compliance. PT can also be an effective tool for detecting widespread analytical problems, subject to limitations based on the method of PT assigned value determination. A recent case study describes the role of two PT programs in detecting and resolving a calibration bias in the LeadCare blood lead analyzer, and illustrates the limitations of peer-group target determination in fulfilling that PT role.     

掺溴聚-4-甲基-1-戊烯的合成研究

 液溴与聚-4-甲基-1-戊烯（PMP）的四氯化碳溶液反应，在光照条件下得到溴代PMP，通过红外与元素分析确证了其结构。并通过热重分析对其性能进行了初步的研究。研究发现，在光照条件下溴原子很容易与PMP中叔丁基上的氢原子发生取代反应，得到化学掺杂溴原子的聚合物。该聚合物在150℃以下比较稳定，在150℃以上就会失去HBr。采用此种方法，可得到掺杂均匀的低密度材料。